Twin screw extruder
•Suitable for hot melt extrusion of various general-purpose plastics
• Screw diameters are 16mm, 20mm, 35mm
•Using "clamshell" split barrel, easy to open for cleaning and observation
•The screw is freely combined with building block threaded blocks
•Single-screw or twin-screw volumetric feeding system
• Optional forced feeding
• Optional loss-in-weight feeding system
• Optional liquid injection system
• Optional sink or conveyor cooling method
• Can be connected to downstream equipment to form cast film line and sheet line
• Siemens motor drive
• Siemens TFT touch screen and Siemens PLC centralized control system, highly intelligent and easy to operate
•Double safety protection for machinery and electrical appliances, in line with CE safety standards
• Recipe storage
Technical parameters:
| Model |
HTGD-16 |
| Screw diameter |
16mm |
| Aspect ratio L/D |
40:1 |
| Motor power |
2kW |
| Speed |
50~600rpm |
| Temperature control range |
350℃ |
| Temperature control accuracy |
±1.0℃ |
| Melt pressure measurement range |
0~35MPa |
| Melt pressure measurement accuracy |
0.2%F.S |
| Output |
0.1-5kg/h |
| Weight |
268kg |
| Dimensions |
1382×690×1230mm |
Real photos:
