Twin screw extruder
•Suitable for hot melt extrusion of various general-purpose plastics
• Screw diameters are 16mm, 20mm, 35mm
•Using "clamshell" split barrel, easy to open for cleaning and observation
•The screw is freely combined with building block threaded blocks
•Single-screw or twin-screw volumetric feeding system
• Optional forced feeding
• Optional loss-in-weight feeding system
• Optional liquid injection system
• Optional sink or conveyor cooling method
• Can be connected to downstream equipment to form cast film line and sheet line
• Siemens motor drive
• Siemens TFT touch screen and Siemens PLC centralized control system, highly intelligent and easy to operate
•Double safety protection for machinery and electrical appliances, in line with CE safety standards
• Recipe storage
| Model |
HTGD-16 |
| Screw Diameter |
16mm |
| L/D Ratio |
28、32、36、40 |
| Motor Power |
2kW |
| Max. Speed |
60~300rpm |
| Heating/Cooling |
Electric heating / Air cooling |
| Max. Temp. |
350℃ |
| Temp. Accuracy |
±1.0℃ |
| Pressure Measuring Range |
0~50MPa |
| Pressure Measuring Accuracy |
0.2%F.S |
| Output |
10kg/h |
| Weight |
500kg |
| Dimension |
1200×690×1230mm |
